Calibrazione Audyssey Pro

Calibrazione Audyssey Pro

Correzione acustica ambientale

Con l'ausilio di un kit professionale Audyssey, siamo in grado di campionare fino a 32 punti nell'ambiente e adeguare la curva di risposta in frequenza del vostro impianto allo scopo di compensare i difetti del vostro ambiente e assecondare le vostre preferenze.

Continua

Preamplificatori Audio Video multicanale

  • Spedizione gratuita
  • Pagamento tasso agevolato

Chiudi scheda »

Preamplificatore multicanale Anthem Statement D2v

Preamplificatore multicanale Anthem Statement D2v

Max. Output: RCA 6.3 Vrms, XLR 12.6 Vrms

€ 8.549,00 (IVA inclusa)

Prodotto mediamente disponibile in 2-5 giorni lavorativi.

Panoramica prodotto

WHAT’S NEW
• NEW! Now with 8 HDMI (v1.3c) inputs and 2 parallel HDMI
(v1.3c) outputs
• NEW! The latest Sigma Designs VXP broadcast-quality digital
video processing:
– Deep color support over HDMI
– Improved noise reduction through block artifact and mosquito noise reduction
• NEW! PCM input is up to 7.1 channels at 24 bits / 192 kHz
• NEW! Two dual-core audio DSP engines (an Anthem design!) offer a total of 800 MIPS to allow decoding of the new Dolby and DTS-HD audio standards
• NEW! Dolby Volume (to be added soon as a free software download from our website at www.anthemAV.com)
• The critically acclaimed Anthem Room Correction (ARC™) system is included!


The Anthem Statement D2 ushered in a new era of music and home theater performance. With the unparalleled flexibility you had come to expect from Anthem processors, it provided the versatility and the adjustability you needed (and still need!) to make all your digital video
components work together seamlessly. The results were spectacular.
That was then, this is now. If there were another word, a better word than “spectacular” to do the D2v justice, to describe its phenomenal abilities succinctly, we’d use it. But there isn’t. The new feature set
(provided above right) has taken the D2v to an entirely new level of performance. True next-generation performance. To truly do it justice,
you need to give it a listen.
Designed, engineered and manufactured in North America, the D2v remains the ultimate high-end statement—the final word in digital audio and digital video processing, not to mention, through ARC, its ability to solve the problems of “the room.” Full details are available on the following pages.

SOUND FROM HDMI SOURCES PLAYS PERFECTLY, AT LEAST IT DOES IF YOU’RE USING A D2v

Why? In the D2v, all eight HDMI inputs are connected through highperformance TMDS (Transition Minimized Differential Signaling) timing
regenerators and multiplexers. The receiver contains a programmable equalizer and a Clock Data Recovery (CDR) function for each of the three
TMDS pairs in an HDMI or DVI signal. The TMDS data outputs are regenerated and perfectly aligned to the regenerated TMDS clock signal,
creating an extremely clean low-jitter DVI/HDMI signal that is easily decoded by the HDMI receiver. This is particularly useful for cleaning up a noisy/jittery source, or when a long or low-quality cable is being used

Specifiche tecniche

  • VIDEO SWITCHING
  • Bandwidth from input jack to output jack (bypass mode for component video)
  • Composite and S-Video: 70 MHz
  • Component: Y 110 MHz, Pr 90 MHz, Pb 80 MHz
  • All analog video inputs and outputs are 75 Ù, 1.5 Vp-p.
  • ANALOG AUDIO
  • Input Impedance: 20 kÙ
  • Output Impedance: Main–RCA 300 Ù, XLR 600 Ù, Zones 2/3 and Record 51 Ù
  • Rated Input: 2.0 Vrms
  • Maximum Input: 5.3 Vrms
  • Minimum Load: 5 kÙ
  • Rated Output (100 kÙ load): 2.0 Vrms
  • Maximum Output: RCA 6.3 Vrms, XLR 12.6 Vrms
  • Headphone Output: 100 mW into 32 Ù at 0.2% THD+N
  • Volume Control Range: Main: -95.5 dB to +31.5 dB (in 0.5 dB increments), Zones 2/3 and Headphone -62.5 dB to +10.0 dB (in 1.25 dB increments)
  • Crosstalk (at 1 kHz): 82 dB between channels; 86 dB between inputs
  • XLR Pin Configuration: Pin 1: Ground, Pin 2: Positive, Pin 3: Negative
  • DIGITAL AUDIO
  • Crossover
  • High-Pass Slope (small speaker setting): 12 dB/octave (2nd order)
  • Low-Pass Slope (subwoofer): 24 dB/octave (4th order)
  • Frequency (adjustable): 25 Hz to 160 Hz (in 5 Hz increments)
  • Tone Control
  • Filter Type: Shelf
  • Range: ±12 dB
  • Bass Turnover Frequency: 200 Hz
  • Treble Turnover Frequency: 2 kHz
  • Analog-to-Digital Conversion S/N Ratio (at digital Rec output) (IEC-A Filter): 100 dB
  • All digital inputs and outputs comply with HDMI , S/PDIF or AES/EBU standards. Sample rate converter output is 24 bit/192 kHz regardless of input.
  • MAIN PATH (RCA and XLR Outputs)
  • Frequency Response and Bandwidth
  • Analog Direct Inputs: 10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 130 kHz (+0 -3 dB)
  • Analog-DSP Inputs at 24/96: 10 Hz to 20 kHz (+0 -0.3 dB), 2 Hz to 44.1 kHz (+0 -3 dB)
  • Digital Inputs at 24/96: 10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 45 kHz (+0 -3 dB)
  • THD+N (at Rated Input and Output)
  • Analog Direct Inputs: 0.006% (80 kHz BW)
  • Analog-DSP Inputs at 24/48 or 24/96: 0.004% (AES17 Filter)
  • Digital Inputs at 24/48 or 24/96: 0.004% (AES17 Filter)
  • IMD (CCIF at 15 kHz and 16 kHz)
  • Analog Direct Inputs: <0.001%
  • Analog-DSP Inputs at 24/48: 0.001%
  • Digital Inputs at 24/48 or 24/96: 0.001%
  • S/N Ratio (ref. 2.0 Vrms, IEC-A Filter)
  • Analog Direct Inputs: 107 dB
  • Analog-DSP Inputs at 24/48 or 24/96: 101 dB
  • Digital Inputs at 24/48 or 24/96: 104 dB
  • ZONE 2 and ZONE 3 PATHS
  • Frequency Response and Bandwidth: 20 Hz to 20 kHz (+0 -0.1 dB), 3 Hz to 140 kHz (+0, -3 dB)
  • THD+N (at Rated Input and Output): 0.06% (80 kHz BW)
  • IMD (CCIF at 15 kHz and 16 kHz): 0.06%
  • S/N Ratio (ref. 2.0 Vrms, IEC-A Filter): 97 dB
  • FM TUNER
  • Sensitivity 50 dB S/N: 13 dBì typical, 25 dBì max.
  • IHF: 10 dBì typical, 20 dBì max.
  • S/N Ratio Mono: 75 dB typical, 65 dB min.
  • Stereo: 69 dB typical, 60 dB min.
  • Distortion Mono: 0.2% typical, 1.0% max.
  • Stereo: 0.3% typical, 1.5% max.
  • Stereo Separation: 40 dB typical, 25 dB min.
  • Alternate Channel Selectivity (±400 kHz): 70 dB typical, 60 dB min.
  • Frequency Response: 25 Hz to 15 kHz (+0 -2 dB)
  • AM TUNER
  • Sensitivity (20 dB S/N): 49 dBì typical, 56 dBì max.
  • S/N Ratio: 50 dB typical, 43 dB min.
  • Distortion: 0.7% typical, 2.0% max.
  • One-Signal Selectivity (±10 kHz): 24 dB typical, 18 dB min.
  • CONTROL
  • Infra Red
  • Carrier Frequency: 38 kHz
  • Maximum 12 V Supply Current: 150 mA
  • Maximum Emitter Current: 60 mA per output
  • RS-232 Interface
  • Connection: DB-9F, straight-wired
  • Pinout (D2 side): Pin 2: Tx, Pin 3: Rx, Pin 5: Ground
  • Baud Rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
  • Configuration: 8 data bits, 1 stop bit, no parity bits, flow control (RTS/CTS, none)
  • Trigger Outputs
  • Polarity: tip positive, sleeve ground
  • Maximum Current at 12 VDC: 300 mA between all three triggers
  • Sequential Delay: 250 ms
  • POWER REQUIREMENT
  • Consumption: Maximum 170 W
  • DIMENSIONS
  • Height: 14.9 cm including feet; rack-mounting: 3 rack units without feet
  • Width: Standard version 49 cm, Rack-Mount version 48.3 cm, No-Handle version 43.8 cm
  • Depth: 38.7 cm
  • Weight (unpacked): 12.3 kg
  • AVAILABLE FINISH: Black

Photo gallery

Dettaglio prodotto

Preamplificatore multicanale Anthem Statement D2v

Condizioni di vendita

Modalità di pagamento

Per questo articolo sono possibili le seguenti modalità di pagamento:

Contrassegno:

Il pagamento dovrà essere corrisposto in contanti direttamente al corriere, al momento della consegna della merce. In alcuni casi, a discrezione del corriere potrebbe essere richiesto un assegno cicolare.

Carta di credito online:

La transazione verrà effettuata online, l’importo verrà addebitato solo al momento della spedizione della merce.
Non sono accettate carte di credito American Express e Diner’s.
Non sono accettate carte di credito internazionali (rilasciare al di fuori del territorio italiano)

Bonifico bancario:

Riceverete i dati bancari per effettuare il bonifico solo dopo che avremo verificato la reale disponibilità del prodotto. L’ordine verrà definitivamente accettato solo dopo la ricezione dell’accredito del pagamento.

Pagamento al ritiro presso nostra sede:

Potrà essere effettuato in contanti o con carta di credito / Bancomat al momento del ritiro della merce presso la nostra sede di Trezzano sul naviglio (MI).
Non sono accettate carte di credito American Express e Diner’s.

Finanziamento:

Il finanziamento può essere richiesto esclusivamente online in pochi semplici passaggi:
1. Al termine dell’ordine si verrà reindirizzati sul sito della finanziaria Consel Spa, dove saranno richiesti alcuni dati personali.
2. Il finanziamento verrà approvato da parte della finanziaria dopo breve tempo.
3. Potrete procedere al pagamento dell’anticipo a mezzo bonifico o carta di credito online (Riceverete istruzioni in merito via email)
4. Riceverete via email il contratto e l’elenco dei documenti da inviare a mezzo posta alla finanziaria.
5. Al ricevimento dei documenti da parte della finanziaria verrà rilsciato il nulla osta alla consegna della merce.

Per un preventivo dettagliato sul finanziamento clicca qui: »

Promozioni

Spedizione gratuita

gratis Questo prodotto viene spedito gratuitamente in tutto Italia, isole comprese.
Se acquisti altri articoli nello stesso carrello, la spedizione è gratuita per tutto l’ordine!

Pagamento tasso agevolato

zeroPuoi pagare questo prodotto in 10 mesi a tasso agevolato, per usufruire di questa offerta seleziona l'opzione Rateale tasso agevolato.
Se acquisti altri prodotti nello stesso carrello, potrai pagare tutto l’ordine in 10 mesi a tasso agevolato!

Per un preventivo dettagliato sul finanziamento clicca qui: »

Trasporto e spedizione

Metodo di pagamentoRitiro in sedeCorriere
Bonifico bancario€ 0,00€ 0,00
Carta di credito on line€ 102,59€ 102,59
PayPal-€ 128,24
Contrassegno al corriere-€ 170,98
Al ritiro: carta di credito / bancomat€ 0,00-

Condizioni di garanzia

Questo prodotto è coperto da garanzia italiana, e proviene dal distributore ufficiale in Italia del marchio.

Durata: 2 ANNI
Descrizione: Riparazione o sostituzione gratuita del prodotto guasto presso la sede di Videosell. La consegna del prodotto guasto al nostro indirizzo è a carico del cliente. La spedizione del prodotto riparato o sostituito al cliente è a carico di Videosell. Per ulteriori dettagli: servizioclienti@videosell.it